|
|
|
|
|
|
|
|
|
|
|
|
|
|
Vintage 1990's Buck Trapper 314X USA David Yellowhorse Customized Knife. The 2 blades measure 3". The handle scales are a gorgeous combination of Turquoise, Red Bloody Jasper, Black Jet, Black Jet, Desert Ironwood and Nickel silver. The knife measures 4.25" closed. The knife has never been but there is a scratch on one of the blades otherwise mint. The knife comes with a zipper pouch no box.
|
Vintage Mel Pardue double liner-lock pearl interframe made by one of the legends of knife making. One of the blades measures 3" the other 2.75". Both have a fine hand rub finish and thumb studs. The knife has gorgeous black lip pearl inserts and the ends are beveled. The inter liner is engine turned. Locking liner operates from a single middle liner. The knife measures 10" with both blades open and 4 1/4" closed. Fantastic craftsmanship excellent fit and finish. This is one awesome heavy duty knife very unique and in mint condition.
|
CASE XX 10 DOT USA 1836 Stag handle bowie knife with Mountain Man scene etched on blade. The 9.5" blade has bright mirror polish finish and beautiful etched scene. The handle is a large piece of drop dead gorgeous stag accented with brass fittings. OAL: 14.25". This beauty has never been used and is in mint condition. The knife was probably made in 1980 I believe. No Sheath or plaque just a great knife.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Vintage hand forged Bowie Knife by Chad Carrol. The blade measures 11.5" and is razor sharp. The coffin shaped handle is Rosewood accented with brass fittings and full tang construction. The knife has been carried but nit used for cutting and is in excellent condition. Original custom sheath which can be worn several ways.
|
Vintage Red Jig Bone 2 Blade Barlow by the Late Bob Enders of Michigan. The blades measure 2" and 2 3/4" both have a bright mirror polish finish. The scales are deep rich red jig bone accented with large 416 s.s. bolster. The knife measures 3 3/4" closed. Fantastic fit and finish everything lines up well plenty of snap and well centered. Mint condition.
|
Three Finger Caper Hunting Knife by Gordon Romeis of Ft. Myers Florida. The 2.5" 440-C s.s. blade is hollow ground with a satin finish. The handle scales are green micarta accented with s.s. pin and lanyard hole. The knife has a nice taper tang and measures 6". Gordon makes a high quality form fitted leather sheath with his logo on back. Excellent fit and finish the knife is new and in mint condition.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Vintage Schrade Cutco Slip Joint Folding Knife. The blade measures 2" and the knife 4" closed. The handle scales look like elephant ivory but I believe they are celluloid. The liners and pins are brass. The knife has been used quite a bit but is very solid, no cracks or problems plenty of snap still.
|
Vintage 80th Anniversary 1985 Case Second Cut Stag 5165 SS a limited Edition of 5000 with serial # 4386. The 3.5" blade is beautifully etched and the serial number is engraved on the bolster. The stag handle looks great. The knife is mint in the wood display and has never been removed.
|
Vintage hand forged stainless steel fighter by Sean McWilliams of Colorado. Sean has been forging knives for over 40 years and is a real pro at forging stainless steel. The logo a circle and 3 points is his philosopy. His knives are very tough. The S35VN stainless steel blade measures 9.25" to the guard and has a beautiful satin finish. The handle is gorgeous sambar stag accented with s.s. fittings. OAL: 14". The knife has nice file work and lanyard hole. The knife is 3/16 thick. This beauty was probably made in the late 70's or early 80's. The knife is in mint condition and comes with the original fancy leather sheath with frog. Zipper pouch included.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Vintage Tanto similar to the Al Mar Shuguto by Parker Eagle Brand Knives NO. AK-1651. This knife was farmed out to the same makers of Al Mar knives in Japan. The 9" blade is surgical steel with etching of eagle. The handle is black paka- wood with nickel silver bolsters and full tang. OAL: 13.25". The knife is mint in the box with original leather sheath.
|
Vintage 1970's Bowie knife made by Schrade for Colt with etching done by Aurum. These were limited edition and each one has a serial number. The 6.5" 440-c blade has beautiful etching of a shot out scene with the inscription "The Gun That Won The West". The handle is rosewood accented with brass fittings and Colt logo. OAL: 11". The knife comes with the original wood display case. The knife has never been used and is about mint except for tarnish. I would be glad to hand polish the brass if the new owner so desires.
|
Vintage Kukri, Bolo, Camp knife handmade by Fox Cutlery in Italy. The 9" stainless steel blade has a satin finish and is razor sharp. The handle is black green micarta with brass fittings and full tang. OAL: 13.75". Great craftsmanship this knife has never been used and is near mint with the original leather sheath.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Hefty Drop Point Skinner with Beautiful Palm Wood Handle by Wayne Hensley. Wayne is acting Vice President of the Knifemaker's Guild and has been making knives since 1973. The 3.5" ATS-34 s.s. blade is hollow ground with a bright mirror polish finish and razor sharp. The handle scales are gorgeous palm wood with 416 s.s. bolsters and pins. The knife has a nice taper tang accented with white liners. OAL: 8.25". The knife is new and in mint condition with the original hand tooled leather sheath.
|
The knife measures 3.25" closed.
|
Boker Tree Brand Classic hunting knife made in Argentina mint in the box. The 4" 440 stainless steel blade is hollow ground and very sharp. The handle looks like grainy black micarta with brass pins. OAL: 8". Full tang construction with finger guard. The knife is like new with original leather sheath and box.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Vintage Bench Mark Rolox Viper Light Weight Model. Bench Mark was a division of Gerber Knives Mint in the Box. The 2.5" blade has swedge and thumb notch. The handle is black carbon fiber accented with red, white and black spacers. Unique opening by pushing the blade forward and out till it locks. This knife is in pristine mint condition with original sheath and box. Knife was designed by Blackie Collins.
|
Vintage Aitor military issued non civilian version issued to the Spanish Special Forces. The 7" blade has a 3" clip and 3.5" of saw teeth. The handle is checkered molded with unique guard and pommel. OAL: 12". This knife has never been used and is mint with original sheath and box.
|
Vintage Stag Lock-Back Folding Knife by Ledger. The 2.25" blade has a bright mirror polish finish and nail nick. The handle scales are nice thick premium stag accented with brass fittings and pins. Measures 3" closed. Every thing is tight, locks up well, no wobble, walks and talks. The knife has never been used and is near mint just needs some polish on the bolsters.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Blade: 5.25" Handle: maple burl Sheath: leather OAL: 10" . Big Game Skinner
|
Large hand forged fighting knife by ABS JS Kyle Gahagan of North Carolina. The 10" blade.
|
Myerchin Sailors knife Tested: Marine Professional. The 440-c s.s. blade measures 2.5". Stainless steel knot pick and clasp locking mechanism. Measures 3.75" closed. These knives are serial numbered and Patented. This knife has been carried and has some scratches, otherwise excellent condition. Original nylon sheath included.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Rare Camp Knife by Condor Sport Knives which was the name before they moved from Japan to Effingham. Now known as Blackjack Knives. This early Blackjack has a 6.75" blade very sharp. The handle is Zytel with thumb notches. OAL: 12". The knife has never been used and is in mint condition with original sheath and box which is in very good condition for its age.
|
Green Jig Bone lock-back folder marked #1 by Randall W Gilbreath of Dora AL. The 3" blade has a hand rub finish and is marked #1. The handle scales are green jig bone with s.s. bolsters. The knife measures 4" closed. The knife has never been used and is in mint condition.
|
Early A. G. Russell "One Hand Knife" made in the USA in mint condition. The serrated blade measures 3" with brass thumb stud on both sides. The frame is made from one piece of stainless steel with unique one hand open and closing. The knife measures 7" open and around 4" closed. Nice example of the first model made in the 80's in mint condition.
|
|