|
KLEIN TOOL
|
|
WESTERN KNIVES
|
|
KABAR
|
|
|
|
|
|
|
|
|
Vintage 1980's lock-back folding knife similar to the buck 110, handmade in Japan for Klein Tool. The 2" 440 s.s. blade is hollow ground with a brush finish. Blade is stamped with #44035. The handle scales are deep rich rosewood accented with heavy brass bolsters and pins. The knife measures 5" open. Fantastic quality this knife was made to last for generations. Mint condition.
|
Vintage Western U.S.A. W 39 excellent used condition. The 5" carbon steel blade has thumb notches, there are some scratches and patina but the blade is full. The handle is rosewood accented with brass guard and aluminum pommel. OAL: 9" The markings are aa bit different on this knife. The blade is stamped Western with U.S.A. under it, and the guard is stamped W-39. The knife is solid no problems and comes with a custom made sheath.
|
Vintage Kabar 1203 USA never used near mint condition. The 4" blade still has a bright original mirror polish finish. The leather stacked handle is in like new condition accented with brass guard and aluminum pommel. OAL: 8.75". Hard to find in this condition.
|
|
|
|
WESTERN KNIVES
|
|
WESTERN KNIVES
|
|
SPYDERCO
|
|
|
|
|
|
|
|
|
Vintage 1980's Western U.S.A. W84 F in mint condition with custom leather sheath. This knife has a 4" stainless steel drop point blade with satin finish. The handle is wood accented with brass pins. OAL: 8.75". The knife has never been used and is in mint condition.
|
Vintage Western U.S.A. W36 Hunting, Fighting knife lightly used in very good condition. The 5" carbon steel blade is very sharp and full. The wood handle is solid no cracks as aare the spacers. The logo is stamped on the guard not on the blade. OAL: 9.75". The knife is used and polished looks great and was made to last for generations. I have included a nice sheath not original but fits well. This would make a great user or collectible.
|
Ultimate vintage kitchen knife made exclusively for Spyderco Inc. USA by Masahiro in Seki Japan. MBS-26 High Carbon Stainless steel. The blade measures 4.5" with oal: 9". The knife is in mint condition with original carboard sleeve.
|
|
|
|
SPYDERCO
|
|
MUELA
|
|
MUELA
|
|
|
|
|
|
|
|
|
Ultimate vintage kitchen knife made exclusively for Spyderco Inc. USA by Masahiro in Seki Japan. MBS-26 High Carbon Stainless steel. The blade measures 4.5" with oal: 9". The knife is in mint condition with original carboard sleeve.
|
Vintage 1980's Commando, Camp knife by Muela. The 6" blade has a satin finish and is razor sharp. The handle is simulated buffalo horn finger grooved and accented with brass fittings. OAL: 10.5". These knives are made by a family owned cutlery in Spain. They are well made for the price. This one has never been used its in mint condition with original leather sheath.
|
Vintage 1980's Commando, Camp knife by Muela. The 6" blade has a satin finish and is razor sharp. The handle is simulated buffalo horn finger grooved and accented with brass fittings. OAL: 10.5". These knives are made by a family owned cutlery in Spain. They are well made for the price. This one has never been used its in mint condition with original leather sheath.
|
|
|
|
MUELA
|
|
SHARP
|
|
WESTERN KNIVES
|
|
|
|
|
|
|
|
|
Vintage 1980's Commando, Camp knife by Muela. The 7" blade has a satin finish and is razor sharp. The handle is simulated buffalo horn finger grooved and accented with brass fittings. OAL: 11.25". These knives are made by a family owned cutlery in Spain. They are well made for the price. This one has never been used but could use some polish to be in mint condition. Original leather sheath included.
|
Vintage Custom Crafted Sharp Model 300 Lock-back folding knife, box and sheath. The 4" blade is razor sharp. The knife has a s.s. frame with ebony inserts. OAL: 9". There is a scratch on the blade otherwise mint with original box which is kind of rough but complete. I will include a custom tooled leather sheath in the picture.
|
Vintage Western U.S.A. S-H48A in mint condition. The blade measures 4.5" to the guard. The handle is Staglon very nice looking. The guard is brass with aluminum pommel. OAL: 8.25". The knife is in mint condition no sheath.
|
|
|
|
WESTERN KNIVES
|
|
SPYDERCO
|
|
SPYDERCO
|
|
|
|
|
|
|
|
|
Vintage Western U.S.A. W39 E in mint condition with sheath. The 5" blade has thumb notch and a bright mirror polish finish. The rosewood handle is accented with brass guard and aluminum pommel. OAL: 9.5". This beauty is like brand new with dear scene on sheath.
|
The ultimate utility, kitchen knife Made Exclusively for Spyderco. Inc. USA by Masahiro in Seki Japan MBS-26 High Carbon Stainless Steel. The 8" blade has a razor sharp serrated edge and is flexible. The handle is rubber molded contour fit with ridges for a great grip. OAL: `13". This is old new stock in mint condition. Comes with original cardboard sleeve.
|
The ultimate utility, kitchen knife Made Exclusively for Spyderco. Inc. USA by Masahiro in Seki Japan MBS-26 High Carbon Stainless Steel. The 8" blade has a razor sharp serrated edge and is flexible. The handle is rubber molded contour fit with ridges for a great grip. OAL:13". Mint condition.
|
|
|
|
SMOKY MOUNTAIN KNIFE WORKS
|
|
HENSLEY
|
|
OLSEN KNIVES
|
|
|
|
|
|
|
|
|
Vintage Butterfly Knife called Wrist Fricker by Smoky Mountain Knife Works. The black coated blade measures 3.5". Camo steel handle with holes. Measures 9" open. Never been used mint condition.
|
Wayne Hensley Serial #11 Limited Edition knife. Flint River Knife Club 2007 1 of 30. The blade measures 2.5" with a bright mirror polish finish. The handle scales are rosewood with 6 pins and lanyard hole. Full tang construction and etching on blade. OAL: 6". Knife has never been used and is in mint condition with original leather sheath.
|
Vintage Olsen throwing knife never used with original leather sheath. (OLSEN OK 409 USA). The blade measures 7.25". The handle is a micarta like material and has 2 brass pins. OAL: 11.25". This knife has never been used but did carbon up over the years. There are no pits and, the knife could be polished to look like new if desired.
|
|
|
|
MABRLE'S
|
|
ROADRUNNER
|
|
KERSHAW
|
|
|
|
|
|
|
|
|
Vintage 3 line Marble's Ideal with original leather sheath. The 6: blade is full but scratched up. The leather handle is solid and tight as are the spacers. The aluminum pommel is a add on perhaps the original was plastic. OAL: 9 7/8". A good condition solid knife could use a little cleaning. The snap is broke on the sheath and lose stitching.
|
This handmade knife is from the Texas Gunther collection and was probably made in the 70"s. The 3.5" hollow ground blade has a satin finish. The handle is deep rich rosewood accented with s.s. pins and aluminum guard. The knife is full tang with lanyard hole. OAL: 8". The knife does not appear to have been used much if at all. The knife is somewhat crude but has a cool factor and would made a great user. Original sheath included.
|
Vintage Kershaw, Kai Cutlery, Field & Stream Task Force Model 1029 TF mint in the Box. Handmade in Japan. This is a very hard to find model in any condition. The 4" blade is flat ground and very sharp. The handle is rubber Kraton with finger grooves. OAL: 8.25". The knife has never been used and is in mint condition with original Nylon sheath and box.
|
|
|
|
WESTERN
|
|
HEN & ROOSTER
|
|
KERSHAW
|
|
|
|
|
|
|
|
|
Vintage Western U.S.A. W77 F, Boot Knife, Dagger, Stiletto, mint condition. The 4" s.s. blade is double edge sharp. Beautiful wood scales, full tang, s.s. pins and a double guard. OAL: 8.5". This knife was very well done the grind and finish are exceptional to most. The knife is in mint condition and comes with a double snap military style sheath.
|
Nice Fight'n Rooster Stag Boot Knife made in Germany. The 4" blade is hollow ground with a mirror polish finish. The handle scales are matching stag. OAL: 7.5". The knife has never been used and is in excellent condition. There is some shrinkage in the handle and a small gap near the guard. Original leather metal tip sheath.
|
Vintage Kershaw, Kai Cutlery, Field & Stream Task Force Model 1031 TF mint in the Box. Handmade in Japan. This is a very hard to find model in any condition. The 5.5" blade is flat ground and very sharp. The handle is rubber Kraton with finger grooves. OAL: 10.25". The knife has never been used and is in mint condition with original leather sheath and box.
|
|
|
|
LE COUTEAU VOLANT
|
|
ROMEIS GORDON
|
|
FROST CUTLERY
|
|
|
|
|
|
|
|
|
LE COUTEAU VOLANT DEPOSE, commando dagger called the flying knife. This vintage knife was made in France. The 7" blade is double edge top not sharp. The handle is hard rubber with double s.s. guard. OAL: 11.5". The knife has never been used or carried and is near mint with original leather sheath.
|
Handmade Hunting Knife by Gordon Romeis of Ft. Myers Florida. The 2.5" 440-C s.s. blade is hollow ground with a satin finish and very sharp. The handle scales are brown micarta accented with s.s. pin and lanyard hole. The knife has a nice taper tang and measures 6". Gordon also makes a high quality form fitted leather sheath with his logo on back. Excellent fit and finish. Great light weight knife for back packing, hiking, etc.. This beauty is new and in mint condition.
|
Vintage Game Hunter 11 Ak-465 Wild Ducks Scrimshaw 1982. Custom Design handmade in Japan. The 2" surgical steel blade has thumb notches and is razor sharp. The handle is smooth bone accented with a wild duck scene and nickel silver bolsters. The serial number 081 is stamped on the front bolster. OAL: 5.75". Made in Japan marked on blade. Nice package comes with original receipt, box, and leather sheath all in mint condition except box has a few bumps.
|
|
|
|
ROMIES GORDON
|
|
ROMIES GORDON
|
|
REMINGTON
|
|
|
|
|
|
|
|
|
Handmade Hunting Knife by Gordon Romeis of Ft. Myers Florida. The 2.5" 440-C s.s. blade is hollow ground with a satin finish and very sharp. The handle scales are maroon micarta accented with 2 s.s. pin and lanyard hole. The knife has a nice taper tang and measures 6". Gordon also makes a high quality form fitted leather sheath with his logo on back. Excellent fit and finish. Great light weight knife for back packing, hiking, etc.. This beauty is new and in mint condition.
|
Handmade Hunting Knife by Gordon Romeis of Ft. Myers Florida. The 2.75" 440-C s.s. blade is hollow ground with a satin finish and very sharp. The handle scales are maroon micarta accented with 3 s.s. pin and lanyard hole. The knife has a nice taper tang and measures 6.5". Gordon also makes a high quality form fitted leather sheath with his logo on back. Excellent fit and finish. Great light weight knife for back packing, hiking, etc.. This beauty is new and in mint condition.
|
Vintage Remington UMC R-6 Skinner, Bush Crafter Special made in the U.S.A. The 4" blade has precision point control and saw. The handle scales are Delrin, Staglon with nickel silver bolsters. OAL: 8.75". The knife has never been used mint condition with original sheath, stone, papers, box and plastic guard for the saw teeth.
|
|
|
|
BUCK
|
|
NOLEN KNIVES
|
|
COLD STEEL
|
|
|
|
|
|
|
|
|
Vintage 1967-1972 Buck Special model 119 with inverted 2 line tang stamp. The 5.75" 440-C blade has the 2 line inverted stamp. The black phenolic handle has finger groove and aluminum fittings with red spacers. OAL: 10.25". The knife has been used but is in very good condition with original sheath. The sheath has been modified with few holes perhaps for attachments.
|
Vintage custom knife by the Nolen Brothers. The 3" blade is convex ground with a mirror polish finish and thumb rest. The handle scales are the old discontinued Westinghouse ivory micarta accented with 6 brass pins and lanyard. OAL: 8". This early Nolen knife does not appear to have been used and is in excellent condition. Nylon sheath included.
|
Vintage Cold Steel Master Hunter 36C Mint in the Box. This is by far the best hunting knife Cold Steel ever made. The Carbon V steel blade measures 4.5" with flat grind and a razor edge. The Kraton rubber handle is kind of sticky for a great grip. OAL:9". This knife is in near mint condition and comes with the original box and sheath. They made 2 different sheaths for this model one was plain leather the other was Kydex and nylon.
|
|
|
|
COLD STEEL
|
|
COOK, DENNIS
|
|
COLLINS, BLACKIE
|
|
|
|
|
|
|
|
|
Vintage 1987 Recon Tanto 13R by Cold Steel Made in the U.S.A. The 400 series stainless steel carbon V blade has a cutting edge that measures 5.25" with a bead blast finish. The handle is rubber with brass fittings that are also bead blasted. This knife is different from the rest with its unique dome top pommel. OAL: 11.25". This knife is much rarer than the standard 13A version, as it was only made for about 1 or 2 years 1986-1987. This knife was no longer shown in the 1988 catalog. Also these 13R's were only available from Matthews Cutlery in Dacator Ga. This knife came from an old dealer inventory and other than the brass oxidation the knife is in near mint condition. Premium zipper pouch included no sheath.
|
Gorgeous little drop point hunting knife by Dennis Cook who is the husband of Lynn Dawson the niece of Barry Dawson. The 3" ATS-34 S.S. blade has file work and thumb notch. The handle scales are drop dead gorgeous birdseye maple accented with mosaic pins and lanyard hole. OAL: 7". A really nice knife that feels great in the hand and sure is pretty. Mint condition with original leather sheath. From the Ike collection.
|
Vintage Survival Bowie Knife by the late Blackie Collins. The 7.5" blade is hollow ground with a 4" partial double edge on top. The handle is hard theromo-plastic with storage in handle. OAL; 12.25". The knife has never been used and is in excellent condition with original military style sheath.
|
|
|
|
MUELA
|
|
BUCK
|
|
CASE
|
|
|
|
|
|
|
|
|
Muela Lenador Bowie knife mint in the box. The 9.5" blade has a brush finish and is very sharp. The handle is wood with brass fittings. OAL: 15'. The knife has never been used and comes with original box and leather sheath.
|
Vintage Buck Kalinga MIB. 5" blade OAL: 10". Beautiful Red Buckarta handle with brass fittings. Comes with original box, sheath and paper all near mint. There is a in the velvet from the blade tip and the brass could use some polish.
|
Vintage 1960's CASE XX USA 516-5 in near mint condition with original leather sheath. The 5" blade has blood groove and finger notch. The handle is premium stag accented with s.s. guard and aluminum pommel. OA:" 9". The knife has never been used and is in near mint condition. The sheath is rather rare with metal guard.
|
|
|
|
J S
|
|
LYNN, DAWSON
|
|
DICKSON KNIVES
|
|
|
|
|
|
|
|
|
Vintage 1970's? hunting, skinning, camp knife by a maker that just stamped initials JS on one side and 867 on the other side. The 5" blade is convex ground with a super bright mirror polish finish. The handle scales are beautiful rosewood accented with 3 brass pins and finger grooves. OAL: 10". Very well made knife in original mint condition. I believe the sheath is original to the knife.
|
Little Hydra model by Lynn Dawson who is Barry Dawson's niece. The s.s. blade has a 2.5" cutting edge with satin finish. The handle scales are ivory paper micarta with 2 pins and taper tang. OAL: 6.5". Nice knife never used mint with original premium leather sheath.
|
Vintage Fighting Knife, Dagger, Stiletto, Survival Knife by Dickson Knives. The Damascus double edge blade measures 6". The handle is deep rich rosewood accented with large double brass guard and pommel. OAL: 10.5". The knife comes with the original well made leather sheath. The knife has never been used and is about mint could use some polish.
|
|
|
|
HANSANDERSEN
|
|
BLB
|
|
DAWSON, BARRY
|
|
|
|
|
|
|
|
|
Rare vintage Hansandersen sailors rigging knife with Marlin spike. The 4.75" s.s. blade is marked HANSANDERSEN DENMARK STAINLESS on one side and knife logo on the other side. The handle is lightly grained wood with aluminum guard and butt, OAL: 9". This old knife has never been used and is near mint with original sheath and spike.
|
Vintage custom hunting knife by a maker that goes by the initials BLB. The 4.25" blade is hollow ground with a mirror polish finish. The handle is a beautiful piece of rosewood accented with brass fittings. OAL: 9.75". The knife does not appear to have been used and is in excellent condition. The butt of the knifer has the initials BDV stamped on it. Custom leather sheath included.
|
Vintage Bird & Trout knife by Barry Dawson USA. The 3" ATS-34 S.S. is hollow ground, Thumb notch, with a satin finish. The handle scales are green micarta with 2 pins and extended lanyard hole. OAL: 7.25". Nice older knife in mint condition with original premium leather sheath.
|
|
|
|
KERSHAW
|
|
BROOKS, GLEN
|
|
BROOKS, GLEN
|
|
|
|
|
|
|
|
|
Kershaw Easy Rider Series set of 4, model 2205,2210, 2220, and 2230 all in mint condition. The 4 knives all have etched scenes, rosewood inserts with s.s. frames. The blades are made of AUS*-A.s.s.. This was a salesman sample and did not come with sheaths. These knives were made between in the 70's to the 80's.
|
Handmade hunting knife by Glen Brooks. The 4.25" s.s. blade is hollow ground with a brush finish. The handle scales are Ebony with 6 pins. The knife is full tang construction with fancy file work. OAL: 9". The knife has a dovetail s.s. guard and file work for thumb rest. The knife has never been used and is near mint with original custom fit leather sheath.
|
Handmade hunting knife by Glen Brooks. The 4.25" s.s. blade is hollow ground with a brush finish. The handle scales are gorgeous rosewood burl with 6 pins. The knife is full tang construction with fancy file work. OAL: 8.75". The knife has a dovetail s.s. guard and file work for thumb rest. The knife has never been used and is near mint with original custom fit leather sheath.
|
|
|
|
RITT
|
|
ANDERSON G
|
|
ELSMORE
|
|
|
|
|
|
|
|
|
This well made knife is from the Texas Gunther collection. The makers name is Ritt and the knife is stamped number 83. The knife was probably made in the 70's. The 4" blade is hollow ground with a bright mirror polish finish, and fancy file work. The handle is deep rich finger grooved rosewood accented with unique shaped brass guard. The knife has a slight taper tang and 9" OAL. This knife has never been used but has some light sheath scratches otherwise mint. The sheath is not original to the knife but fits ok. PS the knife has initials RB on the butt.
|
Handmade drop point hunting by G. Anderson of Utah. The knife has a 4" hollow ground blade that is hair shaving sharp with thumb notch. The handle is dyamondwood which is really tuff stuff and looks good. The knife has a brass guard and full tang with lanyard. OAL: 8.25". This knife has never been used and is in mint condition with original sheath.
|
Vintage Eddy Elsmore Hunting Knife, Bird & Trout. The 3" blade is s.s. with a fine handrub finish. The handle scales are beautiful matching sheeps horn with s.s. guard and pins. The knife has a fine taper tang accented with red liners. OAL: 7". This is a really pretty knife in mint condition. Form fitted leather sheath by Sheery Lott.
|
|
|
|
NOLEN KNIVES
|
|
BUCK
|
|
HUMPHRIES
|
|
|
|
|
|
|
|
|
Vintage handmade boot knife by the Nolen brothers. This unique boot knife has a 4" double edge convex grind blade. The handle scales are the old discontinued Westinghouse Ivory Micarta accented with brass fittings. The knife is full tang construction and the bolsters are dovetailed very well done. OAL: 9". This knife really locks in the hand and feels great. The knife has never been used and is in excellent condition. Nylon sheath included.
|
Vintage Buck General Model 120 mint in the box. The blade measures 7.5" with blood groove. Black handle aluminum fittings. OAL: 11.75". The knife is in pristine mint condition with original sheath, box, and papers.
|
Handmade dagger by Humphries. The 5" double edge blade has a mirror polish finish and file work. The handle scales are the old discontinued Westing House Ivory Micarta. The knife is full tang with double guard and 10 pins. OAL: 9". Well made knife probably from the 70's in near mint condition with premium custom sheath marked 918 on back.
|
|
|
|
JOHNSON, GORDON
|
|
PUMA
|
|
GERBER
|
|
|
|
|
|
|
|
|
Vintage 2003 Gordon Johnson custom handmade hunting knife in mint condition. The 3" blade has a bright mirror polish finish. The handle scales are absolutely gorgeous maple burl accented with 4 s.s. pins and lanyard. The knife is full tang construction and measures 7.5" open. The knife has never been used and is in mint condition with original sheath.
|
Vintage 1975 Puma Model 3573 Boot Knife in mint condition. The 4.25" blade has a bright mirror polish finish. The handle scales are gorgeous stag inlayed into an integral frame. OAL: 8". The knife comes with the original boot sheath. A couple very light sheath scratches otherwise mint.
|
Vintage 1980's Gerber Bowie Knife with original box and sheath. The massive 9.5" blade is over a quarter inch thick and has a fine bead blast finish. The handle is rubber with brass double guard and lanyard hole. OAL: 14.75". This knife has never been used and is in near mint condition with original heavy duty nylon sheath.
|
|
|
|
LYNN, DAWSON
|
|
HENDRIX
|
|
CASE
|
|
|
|
|
|
|
|
|
Medium Hydra Model by Lynn Dawson who is Barry Dawson's niece. The s.s. blade has a 3" cutting edge with a satin finish. The handle scales are ivory paper micarta with a pins and lanyard hole. The knife is full tang construction with file worked spine. OAL: 7.75". Nice knife is mint condition with original leather sheath.
|
Nice little bird & trout knife by Wayne Hendrix. The 2 3/4" blade is hollow ground with a mirror polish finish. The handle is stag accented with s.s. guard and a fine taper tang. OAL: 6 1/2". The knife has serial # 1930 on the tang. The knife has never been used and is in mint condition. Leather sheath included.
|
CASE XX 10 DOT USA 1836 Stag handle bowie knife with Mountain Man scene etched on blade. The 9.5" blade has bright mirror polish finish and beautiful etched scene. The handle is a large piece of drop dead gorgeous stag accented with brass fittings. OAL: 14.25". This beauty has never been used and is in mint condition. The knife was probably made in 1980 I believe. No Sheath or plaque just a great knife.
|
|
|
|
CARROL, CHAD
|
|
SMITH & WESSON
|
|
DUFF, BILL
|
|
|
|
|
|
|
|
|
Vintage hand forged Bowie Knife by Chad Carrol. The blade measures 11.5" and is razor sharp. The coffin shaped handle is Rosewood accented with brass fittings and full tang construction. The knife has been carried but nit used for cutting and is in excellent condition. Original custom sheath which can be worn several ways.
|
Smith & Wesson Texas Rangers Commemorative Bowie Knife Mint in wooden Box. The 5.75" blade is stamped (Texas Rangers 1823-1973) on one side and the S&W 1973 logo on the other side. The serial number TR18984 is stamped on the top spine of the blade. Beautiful grain handle with logo and brass fittings. OAL: 10". The knife is in mint condition with original walnut display box. Blackie Collins Design.
|
Vintage Scrimshaw Duck Scene drop point hunting knife by the late Bill Duff {RIGID KNIVES}. The 3.5" blade is hollow ground with a bright mirror polish finish. The handle scales are the old Westinghouse ivory micarta with scrimshaw by D R Myrer. The knife is full tang with brass fittings. The knife is near mint with leather sheath.
|
|
|
|
MAXWELL, DON
|
|
WEILER
|
|
KING, HARVEY
|
|
|
|
|
|
|
|
c
Custom Handmade Boot Knife, Hunting Knife by Don Mxwell from Fresno California. The 4" blade has a brushed finish on the flat area. The scales are desert ironwood accented with s.s. dovetail bolsters and mosaic pins. The knife has a very fine taper tang. OAL: 8.25". The knife has never been used and is in mint condition with original sheath.
|
Rare Vintage Integral Border Patrol Knife made by the late Donald Weiler of Yuma Az. The blade measures 3.75" with serrated edge and Treasury US Customs Service emblem. The pinned handle is black micarta, full tang with lanyard hole. OAL: 8.75". The knife has never been used and is in excellent condition with original boot clip sheath. I have only seen one other knife like this Weiler, and it had a Border Patrol Emblem instead of Treasury. The seller stated that Mr. Weiler told him he only made 71 of these knives so I'm not sure if this knife is part of that run.
|
Beautiful custom handmade drop point hunting knife by Harvey King. The 3.75" D-2 blade is hollow ground and has a fine hand rub finish. The handle scales are gorgeous cross cut Osaqe Orange accented with handmade mosaic pins. The knife has a fine taper tang and 416 s.s. bolsters. A very well made knife in mint condition with original leather sheath. Knife is serial number 23-35.
|
|
|
|
PACIFIC CUTLERY
|
|
GERBER SOLD
|
|
BUCK
|
|
|
|
|
|
|
|
|
Tanto by Kuzan Oda made for Pacific Cutlery in the 70's. This was a limited edition of 2,500 knives. The 6" blade has a simulated hamon line and beveled spine. The handle is ribbed rubber with s.s. guard. OAL: 10.5". The knife has never been used and is near mint with original sheath which can be worn left or right. Kuzan worked with Bob Loveless in the 70. Bali-song, Benchmade Knives.
|
Vintage Gerber LMF 002372 survival knife mint in the box. The 6" blade is ground from 1/4" steel with teeth and has a grey non- reflective finish. Blade still has the original made in the USA sticker on it. The handle is soft rubber which is very comfortable when pounding or chopping. OAL: 10.5". The knife comes with the original sheath and Bianchi belt fastener for quick easy secure attachment. Another accessory is the strap on front with can hold a smaller knife, survival kit or other equipment. I believe the LMF which was made shortly after the BMF is the rarer of the 2. Paper with specs included. Serial number 002372. Note there is a little rust on the sheath snaps and attachment with could easily be removed.
|
Rare vintage Buck Twin Set Model 104, 2 line inverted tang stamp, mint in the box. This set consists of a model 102 Woodsman and a model 103 Skinner both with inverted tang stamps. Both knives have 4" blades and OAL around 8". The handles are black phenolic, aluminum fittings with red spacers. The knives are in mint condition with original box and sheath. A rare find in this condition.
|
|
|
|
HIBBEN, DARYL
|
|
RODEWALD, GARY
|
|
COLD STEEL
|
|
|
|
|
|
|
|
|
Sub-Hilt Fighting Knife by Daryl Hibben the younger brother of Gill Hibben. The 7" s.s. blade is double edge sharp with a fine bead blast finish. The handle scales are green micarta accented with brass fittings. The knife has a full tang with file work. OAL: 12". Superb craftsmanship this knife has never been used and is in mint condition with original sheath.
|
Hand forged Bowie Knife by Master Smith Gary Rodewald of Montanna. The 10.25" blade has a slight clip with satin finish. The handle is stabilized maple burl accented with nickel silver guard. OAL: 15.5". The knife has never been used but had some rust from storage. It has been cleaned and polished so the makers mark is lite, but the rust is gone. There are some light blemishes otherwise excellent condition with original sheath.
|
Vintage 1st gen Cold Steel Tanto 13A in mint condition with sheath no box. The blade measures 5.75" and the oal: is 11.25". The handle is rubber with brass fittings. Original leather sheath with belt slits. The knife has never been used but could use some polish on the brass otherwise mint. This knife is the very early version stamped with marking on one side only and made in the USA.
|
|
|
|
BLACKJACK
|
|
DAWSON, BARRY
|
|
BROWNING
|
|
|
|
|
|
|
|
|
Very rare first run Blackjack mamba made in USA 1987. The blade measures 8" by 1/4" thick with a satin finish. The handle is black Kraton with stainless steel tubes and glue. OAL: 15". The knife has never been used and is in excellent condition no sheath. Some Info I Found Re the Mamba:
The Mamba is the design that really is responsible for launching the entire BlackJack company. The model dates back to the 1970's when the first versions were made and sold from a gun and knife shop that was owned by former BlackJack CEO Mike Stewart. Most of those early knives were made by Mr. Stewart himself. The
first example was made by Mike Stewart and a would be knife maker by the name of Thomas Vincent Miller. At the time Mr. Miller was interested in becoming a knife maker but for some unknown reason seems to have lost interest shortly his involvement with the first Mamba knife. According to information I have recently been sent by a fellow collector, there were approx. 3,000 - 4,000, of the full size Mamba's made, beginning in 1987, and ending in 1993. There were approx. 50 of these done with a moly blade coating. I now believe that the green and black examples below, are moly coated not titanium coated, as I have previously stated. Recently former BlackJack CEO Mike Stewart responded to a question about the full size variant of the Mamba on in the BlackJack forum. Mike had this to say.
"CS-51 was a modified 5160. It had moly added for a bit more toughness. All of the vintage Mambas were all U.S. made , except for one batch of 300. That batch was made by Harumi Suzuki from AUS-8. We finished the blades in our Van Nuys shop and put on the handles. You can tell these from all the others. The blades were about .200' thick and were marked Japan. There were a number of runs of the Mamba.
The first run the Kraton handles were pinned on and glued down. The pins were actually hollow s.s. tubing that was flared. The next run had s.s. screw sets that held the handles in place. The balance of the runs have harder kraton handles that were held on with two large black Allen screws and a brass threaded tube. These Allen sets are what we are going to use on the E.O. The first run was built in our Chatsworth , Ca. shop. 1987. The second run was built in our Canoga Park shop in 1988. The third run was built in our Van Nuys, Ca. shop in 1989. The next two runs were also Van Nuys, Ca. shop in 1990 & 91. The final run was in the Effingham Il. shop in 1993. I think that the total production did not exceed 2500 units. In retrospect, That is not very many units and may explain why we don't see many on the secondary market.
|
Japanese Kogai by Barry Dawson. The 4.5" blackened blade has a nice hamon line and top swedge. The handle is buffalo horn with ito wrap very well done. OAL: 9.25". This beauty has never been used and is in mint condition with original custom leather sheath.
|
Vintage Browning German Damascus Limited Edition Hunting Knife with Wood Display case. Awesome German Damascus hollow ground blade measures 5" and is serial number 384. The handle is beautiful birds-eye maple with lots of character. The knife is hidden tang accented with engraved brass fittings. OAL: 9.25". This knife comes with the original wooden display case with Browning Logo and 1 of 500 on it. All in mint condition. The key is missing but the box opens and closes no problem.
|
|
|
|
DONAVAN, PAT
|
|
BENTON
|
|
GIDCUMB
|
|
|
|
|
|
|
|
|
Vintage stag fighting knife by Pat Donavan. The 7" blade is double edge sharp with a fine hand rub finish. The handle scales are premium sam bar stag accented with s.s. dovetail bolsters. The knife has a taper tang. OAL: 11.75". There is custom file work where the blade meets the bolsters very nice work. The knife has never been used and is near mint accept for some very light scratches on the bolsters. Custom leather sheath with metal boot clip.
|
Vintage handmade fighting knife, chute knife, boot knife by Dale Benton of Engleside Texas. He made knives in the 80's and passed away around 2000. The 5.5" double edge blade with satin finish. The handle scales are Dyamond wood accented with double s.s. guard, pins and lanyard. The knife has a nice taper tang accented with multi liners. OAL: 9.75". This knife is well made never used and is in near mint condition. The knife comes with a military style sheath made by Benchmade. Although the sheath is not original it fits well and is a valuable sheath to collectors.
|
Vintage handmade Bowie knife by Don Duck Gidcumb. The 9.5" blade is hollow ground with top clip not sharp. The handle is Ivory Paper Micarta accented with brass fittings. OAL: 14.75". This is a very well made knife with great balance, fit, and finish. The knife comes with a leather sheath. The knife has never been used but does have a few scratches and nicks. I would rate it excellent plus condition.
|
|
|
|
PACIFIC CUTLERY
|
|
HUK
|
|
FINGER
|
|
|
|
|
|
|
|
|
Vintage Pre-Benchmade Timba by Pacific Cutlery, Bali-Song mint in the box. The 6" blade is wicked sharp with saw teeth. The handle is a green camo micarta with full tang and lanyard hole. OAL: 11.5". This is one bad knife handmade in Japan and mint in the box with original sheath. The strap on the sheath has a defective snap but it also has velcro as a back up which works well to hold the knife in place. Everyone one of these knives I have owned all had the lose snap problem.
|
Vintage custom handmade fighting knife by Richard Planis ex-Navy Seal. The 7" blade is hollow ground with a bright mirror polish finish. The handle scales are black micarta accented with Corby pins and brass guard. The knife has a fine taper tang with lanyard. OAL: 12.5". Well made knife excellent fit and finish. The knife has never been used and is in near mint condition. Custom leather sheath included. This knife was from the Gunther collection in Texas and the only info I have is on a sticker on the butt. So i believe this knife was either made by Richard or made for him not sure.
|
Vintage 1980 scrimshaw Bowie knife by L Finger. This massive Bowie has a 10" blade by 1/4" thick. The hollow ground blade has a mirror polish finish and is stamped serial number 573 on one side and logo of a Finger in a finger with a star. The handle is the old discontinued Westinghouse Ivory Micarta accented with heavy brass fittings. OAL: 15.5". The scrimshaw art work was done by Lou 1980 as signed on the handle. This is one well made heavy duty knives never been used but does have a few scratches and nicks. I would rate the knife excellent plus condition. No sheath will included a zipper pouch.
|
|
|
|
AL MAR
|
|
GIDCUMB
|
|
WILBER W.C.
|
|
|
|
|
|
|
|
|
AL MAR Shugoto 4004 in mint condition. This bad boy has a 7" blade with FNR handle and brass guard. OAL: 11.25". Vintage 1980's with original sheath. Made in Seki Japan. The guard could use some polish otherwise it is pristine mint condition.
|
Vintage handmade Randall model 1 style fighting knife by Don Duck Gidcumb. The 8" blade is hollow ground with top clip not sharp. The handle is gorgeous sambar stag accented with brass fittings. OAL: 13". This is a very well made knife with great balance, fit, and finish. The knife comes with a custom made leather sheath. The knife has never been used and is in mint condition.
|
Rare vintage Loveless style drop point hunting knife by W.C. Wilber of SC. This unique knife has a 4" s.s. blade, with a bright mirror polish finish. The blade has an awesome etched scene of a hunter and a whitetail deer by Dillingram. The handle scales are brownish micarta with brass fittings and taper tang. OAL: 8.5". The knife is marked SS-002 on the other side of the blade. Hard to find knives by this maker who was one of the best. The knife has never been used and is near mint with just a few light scratches or nicks on the unetched side. The knife comes with a leather sheath not original to the knife.
|
|
|
|
AL MAR
|
|
KALFAYAN ED
|
|
AL MAR
|
|
|
|
|
|
|
|
|
Vintage AL MAR Shugoto, Tanken, Tanto Knife in mint condition with original leather sheath. This model has a 7" blade with bevel top edge. The handle is black rubber with brass guard. OAL: 11.25". This one is a safe queen never used or carried. The sheath is original snaps are not broke but there is a little vertigris on the sheath which will clean up easily.
|
Beautiful Sub-Hilt Fighter by the late Ed Kalfayan. The 7.25" ATS-34 s.s blade has a partial double edge top not sharp. The mirror polish finish is top notch and the blade is razor sharp. The handle is deep rich African blackwood. The fittings are all 416 s.s. accented with red, black, and white liners OAL: 11.75". There is something about the feel of a Kalfayan knife that is like no other. And this one feels really good in the hand. Fantastic fit and finish, knife has never been used and is in near mint condition. Also comes with original leather sheath made by Ed.
|
Rare AL MAR Phantom Tanken Dagger Prototype #060 of 200 in mint condition. Vintage 1980's has a 5.5" blade partial double edge top not sharp. Black Zertel handle with brass guard and lanyard hole. OAL: 10". The knife was made in Seki Japan by one of the best. The knife is in mint condition and comes with the original sheath marked 4007, 4006 on back.
|
|
|
|
SAMSON JODY
|
|
McWilliams Sean
|
|
LILE
|
|
|
|
|
|
|
|
|
Rare Jody Samsom not Bali-Song Wee Hawk possible proto type to the Wee Hawk by Bali-Song. The blade has a 3.5" cutting edge plus 2.5" top clip which is sharp. The handle looks like paper micarta very smooth. The fittings are nickel silver. The knife is full tang construction and OAL: 8.25". Absolutely fantastic craftsmanship perfect fit and finish. The knife hs never been used and is in mint condition. Kydex sheath included but not original to the knife fits ok.
|
Vintage hand forged stainless steel fighter by Sean McWilliams of Colorado. Sean has been forging knives for over 40 years and is a real pro at forging stainless steel. The logo a circle and 3 points is his philosopy. His knives are very tough. The S35VN stainless steel blade measures 9.25" to the guard and has a beautiful satin finish. The handle is gorgeous sambar stag accented with s.s. fittings. OAL: 14". The knife has nice file work and lanyard hole. The knife is 3/16 thick. This beauty was probably made in the late 70's or early 80's. The knife is in mint condition and comes with the original fancy leather sheath with frog. Zipper pouch included.
|
Early vintage hand signed James B. Lile stag hunting knife in near mint condition with original Johnson leather sheath. The blade measures 4" and still has all the original finish. The handle is a nice piece of stick stag accented with brass guard. OAL: 8.5". There are a few specks but they are hard to see, very hard to find one this clean. Original sheath number on back in very condition.
|
|
|
|
KERSHAW
|
|
AL MAR
|
|
PARRISH, ROBERT
|
|
|
|
|
|
|
|
|
Rare complete set of 6 Kershaw 10X0 Series knives used as a salesman sample. These were the first knives designed and sold by Pete Kershaw in the early 70's. The knives have never been used only displayed and are all in about mint condition. The handles are phenolic and the fittings are plastic. The blades steel is Aus8. The knives did not come with sheaths and the display box was destroyed so your getting just the knives.
|
Vintage AL MAR SERE 6 Pre-Production Run #150 of 200. This beauty has a 7" spear point blade with incredible saw teeth. The handle is the old brown micarta accented with stainless steel bolsters and brass attachment holes. OAL: 12". The knife has never been used or carried and comes with the original leather sheath. The snap to the stone cover is broke as most are and some verigris on the brass holes of the sheath.
|
Rare vintage hollow handle survival knife by Robert Parrish. The 8" 440-C spear point blade has a 3.5" clip that is sharp and incredible saw teeth. The checkered hollow handle with O ring is for storage. The double guard and cap have lanyard holes for attachments. OAL: 13". This knife is serial number 584204. The serial number dates the knife May of 1984 number 204. The craftsmanship of a Parrish knife is in a class of its own and this is a great example with original leather sheath with stone. The knife and sheath have never been used or carried and are in mint condition.
|
|
|
|
SKY BOB, HAJOVSKY
|
|
CARROL, CHAD
|
|
|
|
|
|
|
|
|
Massive Bowie by Robert Hajovsky also known as Bob Sky Knives. Bob was a founding members of the Knifemakers Guild. This is one of the most incredible Bowies I have had to offer for sale. This massive knife weighs 3 pounds and was ground from 5/8th stock. The handle is gorgeous rich desert ironwood accented with nickel silver fittings. Blade length 11.5" OAL: 17.25". The craftsmanship on this knife is over the top probably one of the best works I have seen from this maker. Deep grind with super mirror polish finish. The knife has never been used and is in mint condition. Zipper pouch included.
|
Awesome Damascus Double edge sword by Chad Carroll from Grant Michigan. The Damascus blade is random pattern with sharp edges. The handle is dark rich stabilized box elder burl accented with hot blued steel fittings. The hilt and pommel are copper pinned and have black and brass spacers. The oal: is 24.5". The custom sheath is spalted oak. Chad's mark and js stamp are on the hilt. The sword and sheath are very well done, never used excellent to mint condition.
|
|
|
